Monel K500 SAW Pipe Suppliers

Monel K500 SAW Pipe Stockists

 

monel-monel400-monel-k500-pipe-manufacturers

Middle East Suppliers is manufacturers, stockiest & suppliers of Monel K500 SAW Pipe. Monel K500 SAW Pipe have special quality finishing and duress for long life, high pressure and zero defects.Middle East Suppliers supplies Monel K500 SAW Pipe to internationally approved quality standards for applications.As well as being available from stock all Monel K500 SAW Pipe can be cut to size and shape according to your fabrication and design requirements and all work is governed by our independently accredited and regularly audited quality systems.

Middle East Suppliers is largest manufacturers & exporters of Monel K500 SAW Pipe. we are supplying Monel K500 SAW Pipe in UAE, Saudi Arabia , Bahrain, Kuwait, Egypt, Turkey, Malaysia, Thailand , Qatar , Iran, Brazil, Mexico, South Africa,Oman, South America, netherlands, italy, houston. we are also manufacturers, suppliers, exporters and stockists of Inconel Products, Incoloy Products , Monel Products, Hastelloy Products, Nickel Alloy Products, Stainless Steel Products, Duplex Stainless Steel Products, Super Duplex Stainless Steel Products in the form of Pipe, Tube, Sheet & Plate, Pipe Fittings,Olets, Flanges, Fasteners, Wire & Rods.

Middle East Suppliersspecializes in Monel K500 SAW Pipe .With years of experience in manufacturing Monel K500 SAW Pipe we offer high quality, lower cost but the best service.Our goal is to fulfill the highest expectations of our customers for delivery and product quality of Monel K500 SAW Pipe.Our Monel K500 SAW Pipe is available in a variety of shapes and sizes to meet your project’s needs.Middle East Suppliers Supply Monel K500 SAW Pipe for application in various spheres of the industries ranging from basic industries such as Sugar, Paper, Textile, Dairy, Engineering to more complex such as Oil & Gas, Petrochemical, Chemical & Fertilizers, Power Generation and Nuclear Industries.

quick-enquiry

 

General Information of Monel K500 SAW Pipe ?

saw-pipe-suppliersSAW pipe is Submerged Arc Welded pipe. They are the pipes formed by the process called Submerged Arc welding. there can be two types of SAW pipes: 1. LSAW-Longitudinal SAW and 2. HSAW – Helical SAW.(aka Spiral SAW) LSAW pipes are basically pipes formed by bending rectangular steel plates and are subsequently welded longitudinally(internally and externally) along the seam to form a pipe

HSAW pipes are pipes formed by conversion on Hot Rolled Coils and are subsequently welded internally and externally to form HSAW pipes. SAW process basically consists of an arc submerged in Flux used to weld the pipe. The flux is used to isolate the arc from the atmosphere.

SAW pipe is made of hot rolled coiled steel by automatic submerged arc weld under normal atmospheric temperature. All the pipes are produced according to API Spec 5L, GB/T9711.1, GB/T9711.2, ASTM A252-89 standard. These pipes mainly used in petroleum and natural gas industry to transport flammable and non-flammable liquid and steel construction.

Size:
(O.D×Wall Thickness)mm×Length(mm)
219-3200mm×5-30mm x 12000mm+500mm
In addition to above specification, the pipes can be produced according to customer’s requirements.
Execute Standard:
ASTM A252-89 WELDE AND SEAMLESS STEEL PIPE PILES
API SPEC 5L Specification for Line Pipe
GB/T9711.1 Petroleum and natural gas industries—Steel pipe for pipelines—Technical delivery conditions
SY/T5037 Spiral submerged arc welded pipe for low pressure liquid transportation
Material:
Q235-Q345,L175-L485,SS400,16Mn,L290-L360
or according to the customer’s requirements.
Mainly usage:
Spiral welded steel pipes are widely used in Oil, Natural Gas, Water and other flammable & nonflammable liquid conveyance and distribution pipelines, steel structures for construction and other general purposes by means of their wide size range.
Pipe Coating:
HDPE/ 3PE/ 3PP/ Pipe cement mortar lining

We offer high quality Monel K500 SAW pipe that can be easily welded and brazed.These are made of different material, such as inconel, monel, hastelloy, incoloy, nickel alloy,stainless steel,duplex and super duplex etc. The composition of the pipe is perfect for application in food processing industry. Our range of Monel K500 SAW pipes provide excellent resistance against corrosive media, alkalies and high temperature. Middle East Suppliers supplies Monel 400, K-500. grades in the form of pipe, tubing, fittings, bar, flanges, wire and rod.

 

Monel K500 SAW Pipe Production Range
Range
15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS
Form Seamless / ERW / Welded in Round & Square
Nickel Alloy
Export To: UAE,
Saudi Arabia , Bahrain, Kuwait, Egypt, Turkey, Malaysia, Thailand , Qatar , Iran, Brazil, Mexico, South Africa,
Oman, South America, netherlands, italy, houston

 

 

Middle East Suppliers continues to expand its manufacturing facilities and product ranges to meet the current and future demands of the capital equipment industries.

  • Large diameter (up to 100″) / heavy wall welded pipes (up to 60mm)
  • Unit length up to 12 mtrs with no circular joints
  • Pipes produced by plate, welded and calibrated, ID/OD tight tolerances
  • Stainless / Duplex / Super Duplex/Ni alloys
  • Production capacity up to 15.000 tons per year
  • Advanced welding techniques
  • Mill approved by Shell, Total, Aramco, PDO, Exxon, Statoil and others

 

Type Of Monel K500 Pipe
Available Monel Grades

 

Monel K500 SAW Pipe Composition
Nickel Alloys
Tradename
UNS no.
Werkstoff no
Density (8.8 g/cm3)
Alloy K-500
Monel K-500
N05500
2.4375
8.44

 

Chemical Composition Of Monel K500 SAW Pipe
Elements
Al
C
Cu
Fe
Mn
Ni
S
Si
Ti
Minimum
2.30
27.0
63.0
0.35
Maximum
3.15
0.18
33.0
2.0
1.5
0.010
0.50
0.85

 

Mechanical Properties Of Monel K500 SAW Pipe
Tensile Strength, Ultimate
1100 MPa
160000 psi
Precipitation Hardened. Value at room temperature. Value at 425°C is 860 MPa.
Tensile Strength, Yield
790 MPa
115000 psi
Precipitation Hardened. Value at room temperature; 0.2% offset. Value at 425°C is 630 MPa.
Elongation at Break
25 %
25 %
Precipitation Hardened. Value at room temperature. Value at 425°C is 12%.

 

Physical Properties Of Monel K500 SAW Pipe Fittings
Density (Kg.m-1) 84.3
Magnetic Permeability (20°C) <1.005
Curie Temperature (°C) -90
Young’s Modulus (N/mm2) 179 x 103
Specific Heat, 20°C (J.Kg-1.°K-1) 418
Specific Electrical Resistance, 20°C (?O.m) 0.62
Thermal conductivity,20°C (W.m-1.°K-1) 17.5
Mean coefficient of thermal expansion, 20-100°C (°K-1) 13.4 x 10-6

 

Monel K500 SAW Pipe Cost

 

Monel K500 SAW Pipe Application
  • Marine engineering
  • Chemical and hydrocarbon processing equipment
  • Gasoline and freshwater tanks
  • Crude petroleum stills
  • De-aerating heaters
  • Boiler feed water heaters and other heat exchangers
  • Valves, pumps, shafts, fittings, and fasteners
  • Industrial heat exchangers
  • Chlorinated solvents
  • Crude oil distillation towers

 

Monel K500 SAW Pipe Marking & Packing

pipe-marking-packing-packagingLot of emphasis is placed on the packing and packaging . The Monel K500 SAW Pipe are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. Caps / Bushing are made available to the ends on request of the buyer. All Monel K500 SAW pipe are offered with a NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at Middle East Suppliers

Supply Area :

We Supply Our Monel K500 SAW Pipe to various countries likeUAE, Saudi Arabia , Bahrain, Kuwait, Egypt, Turkey, Malaysia, Thailand , Qatar , Iran, Brazil, Mexico, South Africa, Oman, South America, netherlands, italy, houston etc.

 

Monel K500 SAW Pipe Ready Stock

 

Monel K500 Pipe Application Industries

Middle East Suppliers Supply Monel K500 SAW Pipe for application in various spheres of the industries ranging from basic industries such as

  • Oil&Gas Industry
  • Refineries Industry
  • Petrochemical Industry
  • Fertilizers Industry
  • Aerospace Industry
  • Nuclear Power Plant Industry
  • Chemical Industry
  • Paper Industry

 

Middle East Suppliers is largest manufacturers & exporters of Monel K500 SAW Pipe. we are supplying Monel K500 SAW Pipe in UAE, Saudi Arabia , Bahrain, Kuwait, Egypt, Turkey, Malaysia, Thailand , Qatar , Iran, Brazil, Mexico, South Africa, Oman, South America, netherlands, italy, houston. we are also manufacturers, suppliers, exporters and stockists of Inconel Products, Incoloy Products , Monel Products, Hastelloy Products, Nickel Alloy Products, Stainless Steel Products, Duplex Stainless Steel Products, Super Duplex Stainless Steel Products in the form of Pipe, Tube, Sheet & Plate, Pipe Fittings,Olets, Flanges, Fasteners, Wire & Rods.

 

Monel K500 SAW Product Stock






 

Our Export Countries

 

Contact Us For Your Requirements

Monel K500 SAW Pipe | Monel K500 SAW Pipe Stock| Monel K500 SAW Pipe Suppliers | Monel K500 SAW Pipe Stockists | Monel K500 SAW Pipe Exporters | Monel K500 SAW Pipe Manufacturers | Monel K500 SAW Pipe Price | Monel K500 SAW Pipe Stockists

Monel K500 SAW pipe, Monel K500 SAW pipe Exporter, Monel K500 SAW pipe Importer,Monel K500 SAW pipe Stock Holder, Monel K500 SAW pipe Manufacturer,Monel K500 SAW pipe Supplier, Monel K500 SAW pipe Dealer, Monel K500 SAW pipe Trader,Monel K500 SAW pipe stockists, Monel K500 SAW pipe In India UAES audi Arabia Bahrain Kuwait Egypt Turkey Malaysia Thailand Qatar Iran Brazil Mexico South Africa Oman South America netherlands italy houston, Monel K500 SAW pipe Exporter In India UAESaudi Arabia Bahrain Kuwait Egypt Turkey Malaysia Thailand Qatar Iran Brazil Mexico South Africa Oman South America netherlands italy houston,Monel K500 SAW pipe Importer In India UAE Saudi Arabia Bahrain Kuwait Egypt Turkey Malaysia Thailand Qatar Iran Brazil Mexico South Africa Oman South America netherlands italy houston, Monel K500 SAW pipe Stock Holder In India UAE Saudi Arabia Bahrain Kuwait Egypt Turkey Malaysia Thailand Qatar Iran Brazil Mexico South Africa Oman South America netherlands italy houston,Monel K500 SAW pipe Manufacturer In India UAE Saudi Arabia Bahrain Kuwait Egypt Turkey Malaysia Thailand Qatar Iran Brazil Mexico South Africa Oman South America netherlands italy houston, Monel K500 SAW pipe Supplier In India UAE Saudi Arabia Bahrain Kuwait Egypt Turkey Malaysia Thailand Qatar Iran Brazil Mexico South Africa Oman South America netherlands italy houston,Monel K500 SAW pipe Dealer In India UAE Saudi Arabia Bahrain Kuwait Egypt Turkey Malaysia Thailand Qatar Iran Brazil Mexico South Africa Oman South America netherlands italy houston, Monel K500 SAW pipe Trader In India UAE Saudi Arabia Bahrain Kuwait Egypt Turkey Malaysia Thailand Qatar Iran Brazil Mexico South Africa Oman South America netherlands italy houston, Monel K500 SAW pipe stockists In India UAE Saudi Arabia Bahrain Kuwait Egypt Turkey Malaysia Thailand Qatar Iran Brazil Mexico South Africa Oman South America netherlands italy houston